- Material: (housing and flap) Stainless steel
- Ice cone size: approx. Ø 28 x H 40 mm
- For approx. 40 - 50 kg / 24 h
- Circulation system
- Storage container: 10 kg
- Includes hose for mains water connection (3/4 inch) and drain hose (1/2 inch)
- Air cooling
- Includes a 5-year warranty on the bathtub motor
- Suitable for ambient temperatures from 10 to 40 °C
- Usable at water pressures of 1 to 3 bar
- For water hardness levels above 7° dH, a water softener is recommended.
- Connection: 230 V - 50 Hz - 0.260 kW
- External dimensions: W 496 x D 610 x H 831 mm
- Weight: 55 kg
- Refrigerant: R290
- NO on-site service
____________________________
Safety and warning instructions
- Place the device only on a stable, level and non-slip surface.
- Ventilation slots and openings must remain clear to ensure adequate air circulation and cooling performance.
- After transport or significant tilting of the device, leave it upright for at least 24 hours before switching it on to avoid damage to the refrigerant circuit.
- The device must not be operated near heat sources, in direct sunlight or in damp rooms.
Children and unauthorized persons must not operate the device or be left unattended nearby.
- Never clean the device with a water jet or immerse it in liquids to avoid the risk of electric shock and short circuits.
- Before cleaning, maintenance or prolonged periods of non-use, switch off the device, disconnect it from the mains power supply and allow it to cool down completely.
Damaged cables or plugs must not be used. Replacement should only be carried out by qualified personnel.
- Do not use adapters, extension cords or multiple sockets, as this can lead to overheating and fire hazards.
- After a power outage or disconnection from the mains, wait at least 5 minutes before switching the device back on to avoid damage to the compressor.
- This appliance is intended solely for making ice cubes. Other uses may cause damage and void the warranty.
- The refrigerant is flammable; in case of damage to the cooling circuit, ventilate the room well and avoid open flames.
- Repairs and maintenance work may only be carried out by qualified specialists.
- The water inlet and outlet connections must be correctly and tightly connected to avoid leaks.
- The drain must have a sufficient gradient so that the water can flow away without problems.
- In case of visible damage or malfunctions, stop operation immediately and contact qualified personnel.
