- Material: (housing, work surface, interior) Stainless steel AISI 304,
(Control panel) Steel, black lacquered
- 2 drawers, with practical magnetic seal
- Digital temperature control (DIXELL)
- Insulation: 50 mm
- Static cooling with fan
- Automatic defrosting and automatic evaporation of condensate
- Suitable for climate classes 4 and 5
- Temperature range: +1 / +4 °C
- Connection: 230 V / 1 Ph. / 50 Hz / 0.460 kW
- Contents (gross/net): 265 / 166 L
- Internal dimensions (drawers): 2 x W 958 x D 545
- Internal dimensions (device): W 1000 x D 565 x H 470 mm
- External dimensions: W 1230 x D 700 x H 870 mm
- 4 casters, 2 of which are lockable
- Weight (net/gross): 113 / 125 kg
- Refrigerant: R290
- Energy efficiency class: B (spectrum A+++ to G) in climate class 5
-> High-performance device!
- NO on-site service
____________________________
Safety and warning instructions
- Place the device only on a stable, level surface.
- Ensure that the mains voltage matches the specifications on the nameplate.
Children and unauthorized persons must not operate or misuse the device.
- Never clean the device with a water jet to avoid the risk of short circuits.
- After transporting the device, it must stand upright for at least 24 hours before being switched on to prevent damage to the refrigerant circuit.
- The device must not be operated near heat sources, direct sunlight or in damp rooms.
- For adequate ventilation, maintain a distance of at least 10 cm to the back wall and 30 cm upwards.
- The ventilation area must always be free of dust and obstructions to ensure optimal cooling performance.
- The refrigerant is flammable – damage to the cooling system must be avoided at all costs, and in case of a leak, the room should be well ventilated. Avoid open flames or sparks.
- In case of visible damage or malfunctions, stop operation immediately and contact the specialist dealer.
- Before any cleaning, maintenance or prolonged non-use, unplug the appliance and allow it to defrost completely.
- The condenser slots should be cleaned regularly to remove dust deposits and maintain efficiency.
- Repairs and maintenance work may only be carried out by qualified specialists.
