Drive-on scissor lift 5.0 t – TWSA-50U-G
The drive-on scissor lift is designed for flush installation and features an integrated wheel-free lift and a joint play tester.
The integrated wheel-free lift, with an extension of up to 2200 mm, allows the complete vehicle up to 4000 kg (passenger car) to be lifted with all four wheels.
Furthermore, the TWSA-50U-G has guide rails in the roadways, which allows the use of an additional axle lift for lifting vans.
The rear vibration plates (with pneumatic fixing) and front recesses with 6 insert plates for turntables allow for a very flexible application range from small to large wheelbase.
In addition, the lifting platform is equipped with integrated LED lighting on both sides of the roadway.
The joint play tester is included in the scope of delivery and is controlled via a radio remote control integrated into the LED hand lamp.
For axle alignment, a ratchet system is provided that allows for safe lowering into the safety notches and is therefore also ideally suited as a receiving platform or as a headlight testing station.
Special features
- Top-quality workmanship with CE certificate for UVV approval
- Production after ISO 9001
- CE stop and signal tone when lowering
- Hydraulic synchronization
- IR system synchronization monitoring via light barrier
- Wheel-free jack with extendable vehicle supports up to 2200 mm and 4 t lifting capacity
- Guide rails for the use of axle lifts
- Includes joint play tester with LED hand lamp and radio control
- Automatic safety locking and unlocking (compressed air required)
- Roadway with roll-off protection
- LED lighting options on the lifting platform
- Hose package 3000 mm
- Compressed air at 4-8 bar is required.
Technical data
Maximum lifting height.
2130+410 mm
Lifting and lowering time approx.
25/30 sec.
Drive voltage
400 V / 3 phases
Color
RAL 7016 (anthracite), RAL 7000 (gray)
A notice:
This product requires a higher mains voltage for proper operation and is not equipped with a standard two-prong plug. Installation of non-plug-in devices must be carried out by the respective network operator or a registered specialist company, who can also assist you in obtaining any necessary approval from the network operator for the installation of the device.
TWSA-50U-G - Overview
control unit
The control unit (24 V / IP 54) in conjunction with two limit switches and CE stop ensures a high level of safety and ease of use.
hydraulic cylinder
Four powerful, hard-chrome-plated hydraulic cylinders ensure powerful lifting and lowering.
Safety locking and unlocking
The automatic safety locking and unlocking mechanism requires compressed air at 4-8 bar!
Wheel-free lift
With integrated wheel-free lift and extendable vehicle supports for an extended lifting surface.
insert plates
The drive-on scissor lift is equipped with insert plates that increase the versatility of the lift and allow for quick and precise positioning of optional accessories, such as turntables.
Roll-off protection devices
Vehicle roll-off protection devices prevent the vehicle from rolling off the ground, thus ensuring additional safety.
Swivel joints
All swivel joints and bearing points are equipped with DIN grease nipples and brass bushings, making them particularly wear-resistant.
Joint play tester
The joint play tester is included in the scope of delivery and is controlled via a radio remote control integrated into the LED hand lamp.
LED lighting
The lifting platform is equipped with integrated LED lighting along the entire length of the roadway, both left and right.