Description
Triplex 3-level parking lift
From 1 to 3. Three cars are parked on top of each other in the space of just one parking space!
The Triplex 3-level parking lift TW445P-H3 transforms a conventional parking space into 3 parking spaces stacked on top of each other.
A simple and compact solution for any situation where additional parking spaces need to be created in a confined space.
The TW445P-H3 parking system features two platforms for dependent parking. First, the upper platform is used, then the lower platform, and finally (provided both platforms are raised) the third car parks on the ground. It is a single system for three compatible vehicles.
Due to the design of the 4 columns, a relatively small floor area is required and at the same time only the corresponding footprint of the compact overall system is needed, therefore ideal for tight spaces.
The forward-facing control unit, equipped with a key switch, ensures convenient raising and lowering of the parking platforms.
With a generous clearance of 1850 mm at parking space no. 1 on the ground floor, the first parking space is also accessible for large SUVs. The second level is suitable for vehicles with a total weight of up to 2500 kg and a height of 1650 mm; on the third level, vehicles up to 2000 kg are permitted, the vehicle height depending on the ceiling or hall height.
Due to the unique design of the two interlocking platforms, the Triplex 3-level parking lift has the flattest approach height compared to any 3-level parking lift on the market, making it ideally suited for low-profile vehicles such as sports cars or racing cars.
This also makes it possible to move the vehicle onto the platform without engine power, as the approach angle is very low and the vehicle can be easily pushed onto it.
Available as an option:
Insert plates made of galvanized sheet steel, which serve as dirt and oil traps and thus comprehensively protect the vehicle underneath.
Special features
- Top-quality workmanship with CE certificate for UVV approval
- Production after ISO 9001
- Hydraulic overload valve
- A hydraulic cylinder under the driving surface ensures powerful lifting and lowering.
- Mechanical safety latches
- Automatic unlocking of the safety latches
- slack rope and rope break safety device
- Maximum lane width (for the vehicle above): Parking space 2: 2100 mm / Parking space 3: 2230 mm
- Maximum passage width for a vehicle parked on the ground: 2500 mm
- Maximum track width for the vehicle standing on the lift: Parking spaces 2 and 3: 2230 mm
- Internal dimensions of the columns: 2500 mm
- Maximum clearance height (without safety clearance): 1850 mm
Technical data
Parking space 2: 2500 kg,
Parking space 3: 2000 kg
to parking space 3: 3720 mm
Parking space 3: 2220 mm
to parking space 3: 55 sec.*
From parking space 2 to ground: 17 sec.*
*Depending on vehicle weight and lift setting
TW445P-H3-G - Overview
Parking area
The Triplex 3-level parking lift TW445P-H3 transforms a conventional parking space into 3 parking spaces stacked on top of each other.
Control unit 1
The forward-facing control unit (protection class IP 54 and 24 V control voltage) is equipped with a key switch and ensures convenient raising and lowering of the parking platform.
Control unit 2
The convenient control unit (protection class IP 54, 24 V control voltage) is equipped with a limit switch for limiting the stroke height and an automatic safety device for safe working.
electric motor
A powerful hydraulic unit with an industrial-grade electric motor ensures safe use of the lifting platform.
Unlocking
Automatic unlocking of the safety latches via safety release.
Access ramps
Flexible, wide, and flat ramps allow for effortless access to the lift. Therefore, it is ideally suited for low-slung vehicles such as sports cars or racing cars.
Roll-off protection
Vehicle roll-off protection devices prevent the vehicle from rolling off the ground, thus ensuring additional safety.
Scope of delivery
- Lifting platform including motor unit
- Inspection log and CE certificate for UVV acceptance
- 16 x Heavy-duty anchors M16 (16 mm drill bit required)
- 2 loading ramps | Roll-off protection
- German operating and assembly instructions
- Oil not included - can be ordered separately (capacity: 12L)
- Vehicles not included in the scope of delivery
Excellence and quality are Neuherberger’s highest priorities.
Each product undergoes thorough inspection to meet the most demanding standards. Our online offering consists exclusively of carefully selected items, each of which we select for outstanding performance and reliability. Your well-being is our top priority.